Re-tinning soldering iron tip

Re-tinning a soldering iron tip is an important part of keeping your soldering iron in good condition. It helps to ensure that the tip of your iron is clean and free from oxidation, which can lead to poor soldering performance.

Here’s a step-by-step guide to re-tinning your soldering iron tip:

1. Begin by cleaning the tip of your soldering iron with a damp sponge. This will remove any oxidation or debris that may have built up on the tip.

2. Once your tip is clean, apply a small amount of soldering flux to the tip. This will help the solder to adhere to the tip.

3. Place the soldering iron tip against the side of a soldering iron stand, or any other heat-resistant surface.

4. Place a piece of solder against the tip of the soldering iron. The solder should melt and adhere to the tip.

5. Once the solder has melted and adhered to the tip, remove the soldering iron and allow the tip to cool.

6. Once the tip has cooled, use a damp sponge to remove any excess solder.

7. Your soldering iron tip is now re-tinned and ready to use.

Following these steps will help to ensure that your soldering iron tip is in good condition and ready for use.